Copyright © All rights reserved. Made By RT World of Business.

Prevents side pulling on cranes and hoists

Offers various degrees of adjustment to accommodate different angles

Prevents dragging of loads

Protects rope guide and rope drum and bearings

Easily fitted to any crane or hoist

Reduces down time

Substantial reduction in maintenance costs

As rope guide is protected all limits remain operative  preventing over winding and unwinding of rope

Prevents accidents and ensures much safer  working conditions

Available with timer control panel to allow for isolation of both hoist & long or cross travel  

LM4 high grade aluminum and mild steel

Degreased and pickled to remove scale then phosphated Powder coated and oven cured at 200°C

for 20 minutes to a dry film thickness of 150 microns

Microswitch manufactured to EC specifications up to operating voltage 220v AC

Cranes and hoists are designed for vertical lift only. Side pulling of loads causes damage to the hook block, ropes, sheaves, rope drum and guide, bearings and the general structure. Associated with this is the increased accident potential due to misuse and the potential failure of limit switches and other associated safety items. With the Installation of the Liftco side pulling prevention device the dangerous practice of side pulling of load is eliminated. The crane/hoist can thus lift only vertically, as designed, increasing safety levels on the factory floor and reducing maintenance costs and wasteful down time.

All metal parts zinc plated silver for appearance and protection against rust

A very compact unit normally fitted above the moving range of the bottom block so as not to interfere with the normal height of lift

Load Limiter