VDE 0250 Standards
The pendant cable can be used on control units, as a self-supporting shaft cable, in high-bay racking systems, cableways, etc.
In this control cable, the tensile stresses are taken up by two parallel steel supporting elements incorporated into the outer sheath on either side of the core unit. These supporting elements have a tensile strength of 2100 N each, allowing self-supporting installation lengths of up to 150m.
Extra fine wire strands of bare copper wire
Special PVC-based core insulation, cores twisted together
Weather-resistant outer sheath of special PVC-based compound retaining its flexibility in cold
The support elements with a tensile strength of 2100N each are integrated longitudinally and diametrically opposite each other in the cable's outer sheath.
All dimensions are in mm unless otherwise stated. Alterations are reserved without notice.
APPROX TOTAL WIDTH
APPROX DISTANCE BETWEEN WIRES
WEIGHT APPROX Kg/1000m
AMPS PER CORE
8 x 1,5
Pen 8 1.5
12 x 1,5
Pen 12 1.5
20 x 1,5
Pen 20 1 S